RX7Club.com - Mazda RX7 Forum

2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Delrin Front Control Arm Bushings; Do you need to machine anything?

Thread Tools
 
Search this Thread
 
Old May 15, 2011 | 03:50 PM
Share
  #1  
Tanj!'s Avatar
Tanj!
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (5)
 
Joined: Apr 2007
Posts: 441
Likes: 0
From: Dallas, TX
Delrin Front Control Arm Bushings; Do you need to machine anything?
In order to use the various delrin front control arm bushings do you need to machine the two small barbs off the stock control arm before pressing the delrin bushing on?
Reply
0
Old May 15, 2011 | 07:34 PM
Share
  #2  
farberio's Avatar
farberio
NASA-MW ST4
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Dec 2004
Posts: 3,800
Likes: 3
From: Norcal, Bay Area
I did not machine anything when I put mine on.
Reply
0
Old May 15, 2011 | 07:46 PM
Share
  #3  
GMO-RX7's Avatar
GMO-RX7
All Life
Tenured Member 10 Years
iTrader: (21)
 
Joined: Apr 2009
Posts: 823
Likes: 7
From: mpls
I pounded them suckers in
Reply
0
Old May 15, 2011 | 08:29 PM
Share
  #4  
88rota's Avatar
88rota
Rotary Love!
Tenured Member 10 Years
iTrader: (18)
 
Joined: Dec 2009
Posts: 630
Likes: 1
From: phx,az
try a long bolt with 2 big washers and a nut.
you tighten the nut with the big washer and it acts like a press in a way...
Reply
0
Old May 16, 2011 | 12:12 AM
Share
  #5  
3vil's Avatar
3vil
Mazda Misfit
Tenured Member 05 Years
iTrader: (4)
 
Joined: Feb 2010
Posts: 574
Likes: 1
From: Springtuckey
Originally Posted by 88rota
try a long bolt with 2 big washers and a nut.
you tighten the nut with the big washer and it acts like a press in a way...

yeah but how would you set that up? there is no hole in the control arm at this point to pull the bushing down onto
Reply
0
Old May 16, 2011 | 08:02 AM
Share
  #6  
Tanj!'s Avatar
Tanj!
Thread Starter
Senior Member
Tenured Member 15 Years
iTrader: (5)
 
Joined: Apr 2007
Posts: 441
Likes: 0
From: Dallas, TX
Sounds good. Thanks everyone.
Reply
0
Old May 16, 2011 | 10:13 AM
Share
  #7  
w0ppe's Avatar
w0ppe
CC of L-Squared Shots
Tenured Member: 20 Years
 
Joined: Oct 2003
Posts: 644
Likes: 0
From: Columbus, Ohio
I've always gotten a large sized C-clamp +2 washers for this practice...
Reply
0

Trending Topics

Old May 16, 2011 | 10:14 AM
Share
  #8  
Aaron Cake's Avatar
Aaron Cake
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Like many things in life, lube them up and they should push in with minimal complaint.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Interest in front control arms?
fjwheeler
3rd Generation Specific (1993-2002)
22
Jan 9, 2022 01:02 PM
Suspension Bushings
autoxer
3rd Generation Specific (1993-2002)
21
May 22, 2019 04:07 PM
fc front control arm bushing like this one?
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
Aug 15, 2015 10:32 PM
Tags
Back to Subforum
2nd Generation Specific (1986-1992)
View Next Unread
Damn car will be the death of me.




Advanced Search

All times are GMT -5. The time now is 09:22 PM.