Dashboard understructure 3D scan?
#1
Full Member
Thread Starter
Dashboard understructure 3D scan?
My dash cluster surround is falling off from the top three mount bolts because under the dashboard, the plastic has gotten so brittle, it cracked and is completly gone. The car sat in a field for 10 years, and then an additional 6 in my garage before I finally fixed it up during the 2021 covid lockdown.
Is anyone aware of any 3D scans of this section, so I could 3D print a new section out of PETG or something that can deal with high internal temps for summertime, cut out any remaining bits and then plastic weld a "new" one into place?
I have a 3D scanner, so will likley end up making my own repair, but just checking before I do all that work to see if anyone has anything already existing out there.
Is anyone aware of any 3D scans of this section, so I could 3D print a new section out of PETG or something that can deal with high internal temps for summertime, cut out any remaining bits and then plastic weld a "new" one into place?
I have a 3D scanner, so will likley end up making my own repair, but just checking before I do all that work to see if anyone has anything already existing out there.
Thread
Thread Starter
Forum
Replies
Last Post
Ngan Sik Lung
2nd Generation Specific (1986-1992)
4
06-24-07 02:06 PM
xfeastonarsex
2nd Generation Specific (1986-1992)
6
02-07-04 11:37 AM