2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Dash lights working but marker/parking lights are not. NEED HELP???

Thread Tools
 
Search this Thread
 
Old Jun 12, 2005 | 09:50 PM
  #1  
hp-modz's Avatar
Thread Starter
rotary-4-life
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 132
Likes: 0
From: Stockton,CA
Unhappy Dash lights working but marker/parking lights are not. NEED HELP???

I have no clue what is going on with my 86 GXL

I was at a car meet here in Stockton, when night came around I went to turn on the lights and my buddy noticed my tail lights weren't working. I didn't notice because the gauge lights were still on.

the only light that comes on outside are the headlights.

now keep in mind the gauge lights are still working. <----- thats what had me confused

I have had this happen before with another 7 but the gauge lights were out to, it was just the illum fuse.

I changed that fuse, nothing. I changed the 60a fuse in the engine compartment, nothing. I then pulled the headlight switch and noticed the harness and the switch had burn marks next to the red/black & white/green wires. (so I changed the harness since I had three laying around)

what could the problem possibly be??

is it possible for the switch to go bad where it does not turn on outer lights and still be able to turn on the gauge lights??

Last edited by hp-modz; Jun 12, 2005 at 09:53 PM.
Old Jun 12, 2005 | 10:29 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally Posted by hp-modz
I have no clue what is going on with my 86 GXL

I was at a car meet here in Stockton, when night came around I went to turn on the lights and my buddy noticed my tail lights weren't working. I didn't notice because the gauge lights were still on.

the only light that comes on outside are the headlights.

now keep in mind the gauge lights are still working. <----- thats what had me confused

I have had this happen before with another 7 but the gauge lights were out to, it was just the illum fuse.

I changed that fuse, nothing. I changed the 60a fuse in the engine compartment, nothing. I then pulled the headlight switch and noticed the harness and the switch had burn marks next to the red/black & white/green wires. (so I changed the harness since I had three laying around)

what could the problem possibly be??

is it possible for the switch to go bad where it does not turn on outer lights and still be able to turn on the gauge lights??
The gauge lights and parking lights are on seperate circuits.

Please read the FAQ for FC sticky thread before posting. It has answers to many commonly asked questions, such as yours in this thread.

Thread closed
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
runner83
1st Gen General Discussion
16
Aug 26, 2015 05:16 PM




All times are GMT -5. The time now is 06:53 PM.