cusco camber plates with stock springs?
04-24-04, 08:05 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Cookeville, TN
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
cusco camber plates with stock springs?
I got em for cheap, someone else installed them while I was at work, and now the car makes a bang noise several times while turning the wheels. the plates are adjusted for maximum negative camber. does anyone else have this setup? I will probably go to GC coilovers pretty soon.
04-25-04, 12:29 AM
#3
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Cookeville, TN
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
anyone who has successfully run this setup before? Does anyone know the noise I am talking about. It is not quite like a scraping noise, more of a cank..cank....cank....cank.... while the steering wheel is turning.
04-25-04, 12:33 AM
#4
Senior Member
Join Date: Jul 2003
Location: san diego, ca
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I am running the same set up. is your banging every time you turn? I am also at full neg camber. what size wheels do you have? could be the the inside of the rim is hitting the strut body.
04-25-04, 01:32 AM
#5
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Cookeville, TN
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
the wheels are stock and the tires are 215/60/14 bologna skins. the sounds is like cung..... cung... only when I turn the wheels toward full lock. also, does anyone know what FI plug you are supposed to unplug to adjust the idle enrichment screw?
