2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Cranks, sparks, no fuel, no mmmmmm

Thread Tools
 
Search this Thread
 
Old Apr 24, 2006 | 06:24 PM
  #1  
Mankdrake 2661's Avatar
Thread Starter
Mazda goes MMMMMMMM
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Oct 2004
Posts: 1,002
Likes: 1
From: Collinsville, IL
Cranks, sparks, no fuel, no mmmmmm

Ok. I've got an 88 N/a that had been sitting for awhile. I figured I try to get it going. It won't fire so I propped open the AFM and got it to run. Once it was running I took my prop out and everything was fine ran good and strong.
Turned it off came back acouple days later and I had to go through the same process to get it going but it took a little more cranking to get it going.

Tried acouple days later and it wouldn't start for nothing. I tried ether, I tried everything i could think of, nothing. So I took off the UIM Cleaned out the injectors with cleaner put them back, bought a need gasket, and triied to start it. Nothing.

Now through all this sometimes I would have fuel pressure sometimes not. So I figured The filter or something was clogged and was going to replace it later. BUT Even if the filter is clogged shouldn't the ether still get it to fire? All it does is crank over. It's got spark it smokes out of the exhaust. Maybe it's flooded. I took the plugs out and spun it alot. Still no mmmmmmmmm.

Any ideas? bad AFM, bad computer?
Reply
Old Apr 24, 2006 | 07:32 PM
  #2  
ErixHvn's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2006
Posts: 252
Likes: 0
From: Crawfordville, FL , South of Tally
check the fuel pump? maybe a bad ground there if it is as you described where you got pressure sometimes and sometimes not
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
FC_DREAMS
General Rotary Tech Support
7
Aug 30, 2015 09:12 PM
freq
2nd Generation Specific (1986-1992)
0
Aug 21, 2015 03:30 PM
86glxNA
New Member RX-7 Technical
7
Aug 18, 2015 03:33 PM




All times are GMT -5. The time now is 09:28 AM.