Convertible top on my 88 will not go down!
02-28-06, 05:24 PM
#1
FLEEN7
Thread Starter
Join Date: Sep 2004
Location: SUNSHINE STATE
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Convertible top on my 88 will not go down!
I think my switch is out. What options are there to drop the top without needing to replace the switch. Please let me know. Thanks.
02-28-06, 06:08 PM
#2
Rotary Freak
Is the parking brake engaged?
If that is not the problem...
If the roof moves a little and gets 'stuck', then the computers may think it is already down...
You might try removing and replacing the chips. They may also need to have their contacts cleaned.
If that is not the problem...
If the roof moves a little and gets 'stuck', then the computers may think it is already down...
You might try removing and replacing the chips. They may also need to have their contacts cleaned.
Last edited by BLKTOPTRVL; 02-28-06 at 06:11 PM.
02-28-06, 07:21 PM
#4
Rotary Freak
IceMark may be able to give you a little help... He is big on Vert electronics.
As for dropping the top manually, there are holes in the side of the rear cabin, under the rear shelf... There is an allen wrench that is used to crank the top up or down manually. I have never had to do it so I can't quote the procedure. It is in the manual if you have one.
As for dropping the top manually, there are holes in the side of the rear cabin, under the rear shelf... There is an allen wrench that is used to crank the top up or down manually. I have never had to do it so I can't quote the procedure. It is in the manual if you have one.
02-28-06, 08:06 PM
#5
FLEEN7
Thread Starter
Join Date: Sep 2004
Location: SUNSHINE STATE
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
i replaced the fuse on the box in the spare tire compartment because it was blown. and the top still will not go down. does anyone know if the box where the motors are plugged into might damaged if the fuse was blown?
Thread
Thread Starter
Forum
Replies
Last Post