Convertible top motors
02-01-10, 02:15 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: WOODBRIDGE, VA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Convertible top motors
I own an 1988 vert. I put the convertible top motors on bypass a few years back because the switch went bad. I have just purchased a new cluster switch. Is it possible to put the motors back in operation with the switch? Can I reverse the bypass/manual mode?
02-01-10, 06:39 PM
#2
Yes, you have to remove all the rear covers (if I remember correctly) in the back like you did to bypass the motors and re-engage the motors. I forgot if you use a screw driver or socket, but there is a hole/bolt or screw on the side of the motors that you have to screw/turn in to re-engage. I do remember you want to be gentle with those screws/bolts, just turn them till they stop
Just take it apart and you will see it on the side, I forgot it's been a while : )
The owner's manual has instructions too!
Just take it apart and you will see it on the side, I forgot it's been a while : )
The owner's manual has instructions too!
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
