convert brake line fittins to AN?
06-29-08, 08:25 PM
#1
convert brake line fittins to AN?
i have flared abrake line 3 times, replaced the the actual line itself and proportioning valve.
ive even had a master tech reflare me the line thinking it was me and yet it keeps leaking!
it leaks right where the line goes into the fitting. so im wondering if there is a AN adapter so i can run SS lines instead?
ive even had a master tech reflare me the line thinking it was me and yet it keeps leaking!
it leaks right where the line goes into the fitting. so im wondering if there is a AN adapter so i can run SS lines instead?
06-30-08, 09:29 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
If it's leaking, you are doing something wrong.
Are you sure you are using the correct flare nut and flare angle?
There are AN fittings you can use to replace this. Check the catalog of your favourite AN fitting supplier. Probably not DOT legal.
Are you sure you are using the correct flare nut and flare angle?
There are AN fittings you can use to replace this. Check the catalog of your favourite AN fitting supplier. Probably not DOT legal.
06-30-08, 10:27 AM
#4
well here is the info. on the proportioning valve on top there are 2 lines, i removed abs and mazdatrix gives u a rubber hose to lope those two lines. the lines run across the firewall so i removed and just tried to run a "u" shape brake line instead.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
