2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

clutch trouble

Thread Tools
 
Search this Thread
 
Old May 26, 2003 | 12:55 PM
  #1  
87basemodel's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 22
Likes: 0
From: Allegan
clutch trouble

i was driving my car the other day doin about 45 and when i went into fourth gear i heard a clunk and the clutch never came off the floor i got it home and played with it a little and it springs back but there is no pressure behind the clutch and my fluid is full what should i do??
Reply
Old May 26, 2003 | 02:53 PM
  #2  
Turbonut's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Feb 2002
Posts: 3,993
Likes: 68
From: NJ
It's probably the hydraulics. The cylinder can go bad and still not leak. Check freeplay. If ok, press pedal to floor and hold for about 1 minute. Let up and check freeplay again. If it increases, cly. bad. For the cost, and if they have not been replaced before, just replace master & slave cylinders, and flex line. Install and bleed.
Also when pedal pushed to floor, you might want to have someone look under the car to see if the fork is moving through it's full travel, or not.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
2
Sep 9, 2015 08:06 PM




All times are GMT -5. The time now is 04:44 AM.