2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

CLUTCH PROBLEM

Thread Tools
 
Search this Thread
 
Old Dec 14, 2001 | 03:02 AM
  #1  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 5
Likes: 0
From: PA
Question CLUTCH PROBLEM

This just started to happen, It seems as if my pedal is not engaging all the way. When I push down on the clutch it skreetches like you wouldn't believe and wants to stall. The pedal isnt as stiff anymore. It only happen's when I step on the pedal. Do I need to fill the part by the top of the tranny where the clutch fork is with any hydraulic fluid or grease, or do I need a new pressure plate???
Reply
Old Dec 14, 2001 | 11:51 AM
  #2  
Cameljoe's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 240
Likes: 0
From: Dix Hills, NY
Check the master cylinder. its located on the driverside corner of the engine compartment. Its a round bottle and its behind the terailing coil and to the right of the brake booster. If its low buy some brake fluid and fill it up. If it looks like its in good shape check the slave. Its overby the oil filter. Just follow the line (and inspect them for leaks) from the master to where it goes to the back to the right of the oil filter (if you were in the car). It will lead to the slave which looks like a metal nipple with 2 bolts on each end. Inspect that for leaks.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM
vmerino
2nd Generation Specific (1986-1992)
0
Sep 5, 2015 11:26 AM




All times are GMT -5. The time now is 06:49 AM.