Cluster showing wrong oil pressure.
09-14-04, 08:46 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2003
Location: Sherbrooke,QC,Canada
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Cluster showing wrong oil pressure.
I have installed a new cluster in my 88gxl tonight.
But now, my oil pressure is showing wrong oil pressure reading, its very very low like 0 to 1/4 of the gauge.
How can is fix it without installing a new cluster.
BTW: IT WORKEd GOOD WITH MY OLD GAUGE, dont told me its my oil pressure.
But now, my oil pressure is showing wrong oil pressure reading, its very very low like 0 to 1/4 of the gauge.
How can is fix it without installing a new cluster.
BTW: IT WORKEd GOOD WITH MY OLD GAUGE, dont told me its my oil pressure.
09-14-04, 09:37 PM
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
The rotor gods have taken a giant crap on you my man !!!!!!! LOL
anyway..... the stock gauges SUCK.... the electics in the new gauge cluster must be shot... yo COULD take apart the clusters and put your old OP gauge in the new cluster..
OR, ,you could buy an accurate gauge and one of the oil pressure adapter kits from mazdatrix or racing beat and mount a good gauge!
anyway..... the stock gauges SUCK.... the electics in the new gauge cluster must be shot... yo COULD take apart the clusters and put your old OP gauge in the new cluster..
OR, ,you could buy an accurate gauge and one of the oil pressure adapter kits from mazdatrix or racing beat and mount a good gauge!
09-14-04, 09:38 PM
#5
Former Moderator. RIP Icemark.
check the screws on the back of the cluster... often times corrosion on those screws (which actually send the signal into the gauge) will result in off reads.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM