changin gear box oil question
03-17-03, 08:45 AM
#1
Full Member
Thread Starter
Join Date: Dec 2002
Location: seven heaven
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
changin gear box oil question
just wondering what you would use to seal up the plugs?
where the heck do i start looking for the place to change the oil?
Never done this before and instructions in the manual are abit unclear
where the heck do i start looking for the place to change the oil?
Never done this before and instructions in the manual are abit unclear
![[YMMIJ] is offline](https://www.rx7club.com/images/statusicon/user_offline.gif)
03-17-03, 10:41 AM
#5
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
1) You can pump it in from underneath (builds strong hands & wrists.)
2) Or you can pull off the shifter surround, snake a tube to the fill hole, add a funnel & pour it in.
I have a copy of the entire factory manual on-line. The link is in my sig..
2) Or you can pull off the shifter surround, snake a tube to the fill hole, add a funnel & pour it in.
I have a copy of the entire factory manual on-line. The link is in my sig..
Last edited by SureShot; 03-17-03 at 10:47 AM.
03-17-03, 05:46 PM
#7
Full Member
Thread Starter
Join Date: Dec 2002
Location: seven heaven
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
i mean, in the manual it says to fill up the plugs
to put somethign in between the plug and the housing so that underpressure, the tranny fulid won't leak.
what would i use?
to put somethign in between the plug and the housing so that underpressure, the tranny fulid won't leak.
what would i use?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post