OK so I just got my injectors returned from cleaning and im putting everything back togeather. I found out that my banjo bolt mod was leaking fuel, so Im sure its loosing fuel pressure. But its got spark and I know its getting fuel cause I can smell fuel comming out the exhaust when trying to start it.. I redid all my vac lines with silicone ones. It il crank but not fire, it sounds like it wants to fire, I even tried to unflood it just in case, anyone have any ideas of why it doesnt want to fire up.

 

Anyone?

 

You said you redid your vacuum lines, did you double check you got the FPR vacuum to the right nipple and as for the leaking fuel did you make sure to put the little spacer on the primary rail?(the spacer sits between it and the housing, its the little plate) Easy to forget and if not there it wont bolt up right, could cause leaking or other problems.

Also make sure your plugs are getting sparks, if it is then im out of ideas =P.

Dane

 

Yes the spacer is in for the primary rail, what nipple is the FPR supposed to go to, is there a specific one, that might be a problem in it.