2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

car wont start :[

Thread Tools
 
Search this Thread
 
Old 11-20-07, 11:54 AM
  #1  
Junior Member
Thread Starter
 
Reuffeo's Avatar
 
Join Date: Oct 2007
Location: Hubbard, Ohio
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Angry car wont start :[

ok so here's my dilemma. last week my car died as im driving. i lost everything electrical. i found the culprit in that to be the altenator. but here's the kicker: the car has been in my garage, untouched for three days. when i go to start it, it wont start. it turns over, its got spark, its got gas. but it just sits there spinning and it never fires up. i checker the battery, checked the spark plugs, checked everything i can think to check. i know the altenator is bad but it has nothing to do with the car starting, right? i mean, it should start and stay running for awhile before the battery loses power but i cant get it to start. my next step is to tow it and try to push start it but im waiting for some ideas of other stuff to try first. could the altenator of fried something else when it went bad or something? im getting really pissed. any help anyone can give me would be great. thanks.
Old 11-20-07, 11:57 AM
  #2  
version 2.0

iTrader: (17)
 
texFCturboII's Avatar
 
Join Date: Mar 2007
Location: Fort Worth, TX
Posts: 3,590
Received 1 Like on 1 Post
could be flooded. search for...... **** it I'll just tell you what to do:

1) locate and remove the EGI fuse from the engine bay.
2) crank the engine over for a good ten seconds or so.
3) replace the EGI fuse
4) start the car

you may also have to pull the plugs and put about a teaspoon of oil into the chamber's as well if the previous instructions don't work.
Old 11-20-07, 12:17 PM
  #3  
Junior Member
Thread Starter
 
Reuffeo's Avatar
 
Join Date: Oct 2007
Location: Hubbard, Ohio
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
which egi? the comp or ing?
Old 11-20-07, 12:55 PM
  #4  
Jpk3200

 
Jpk3200's Avatar
 
Join Date: Oct 2006
Location: San Antonio, TX
Posts: 824
Likes: 0
Received 0 Likes on 0 Posts
Old 11-20-07, 01:08 PM
  #5  
Junior Member
Thread Starter
 
Reuffeo's Avatar
 
Join Date: Oct 2007
Location: Hubbard, Ohio
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
thanks i figured it out. my fuse box doesnt look like that though. i have two EGI fuses. car started up after i did that a couple times. smoked like hell :P
Old 11-20-07, 01:14 PM
  #6  
Jpk3200

 
Jpk3200's Avatar
 
Join Date: Oct 2006
Location: San Antonio, TX
Posts: 824
Likes: 0
Received 0 Likes on 0 Posts
Whoops, you have an S4, sorry.
Old 11-20-07, 01:21 PM
  #7  
Junior Member
Thread Starter
 
Reuffeo's Avatar
 
Join Date: Oct 2007
Location: Hubbard, Ohio
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
its cool. now i just need to come up with 100 bucks for an alternator! woohoo!
Old 11-20-07, 01:52 PM
  #8  
version 2.0

iTrader: (17)
 
texFCturboII's Avatar
 
Join Date: Mar 2007
Location: Fort Worth, TX
Posts: 3,590
Received 1 Like on 1 Post
glad you got it running!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM
ashleymiche
Introduce yourself
0
08-14-15 12:59 PM



Quick Reply: car wont start :[



All times are GMT -5. The time now is 04:56 PM.