Can I use the Stock Ecu With 720's(start up)
#1
Retired Moderator, RIP
Thread Starter
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Can I use the Stock Ecu With 720's(start up)
I just want to See if the Engine will Start up.I would like to use the Stock ECU to do this(with 720's X 4),as I haven't Gotten to reading up on the RTEK I have.Thanks Guys.
#4
Top Down, Boost Up
iTrader: (7)
Don't bother trying. You're going to have 25% more fuel throughout the entire RPM range by having 720s in there w/out adjustments. I doubt the car will even start considering it will be trying to idle in the 9-10 AFR range. Get ready for some smoke.
You got an Rtek 2.1, right? It's plug and play. Just follow the first time use instructions, and you'll be fine. You just set the injectors to 720/720 with the engine off, then start it up.
You got an Rtek 2.1, right? It's plug and play. Just follow the first time use instructions, and you'll be fine. You just set the injectors to 720/720 with the engine off, then start it up.
#5
2jz'd fc
iTrader: (24)
Join Date: Jun 2005
Location: Washington- bellingham
Posts: 1,266
Likes: 0
Received 1 Like
on
1 Post
iv done it, it worked fine, but i was also turbo and i dont know if u are or not. at least u know it woulnt be runnin lean lol. but like rotaryrocket88 said, if you actually have the rtek already just hook it up.
#6
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
If all you want to do is start the car to make sure it works, then those injectors will do the job.
But as everyone has said, it will be rich throughout the entire operating range.
But as everyone has said, it will be rich throughout the entire operating range.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM