Can I swap these guages?
#2
RX-7 Bad Ass
iTrader: (55)
Yeah, it can be done. Easiest way would be to get the wiring harness that plugs into the back of the NA cluster as well. You'd have to sit down with the wiring diagrams for both and figure out which wire goes where, but it shouldn't be that hard.
The wiring is the only trick involved - once it's wired in, the cluster will bolt right in and be done.
Dale
The wiring is the only trick involved - once it's wired in, the cluster will bolt right in and be done.
Dale
#3
Post count is over rated
I can do it,being as i had 88 gauges in my 91 t2
on the team fc3s forum,we had a complete write up on it i will email u later tonite with it,send me ur email address.mine is condolence187@aol.com.latez
p.s.-it's easy as hell you jus have to change the position of the pin outs on the lil harness that plugs into the guage cluster.and you will have a working volt meter!ight latez
p.s.-it's easy as hell you jus have to change the position of the pin outs on the lil harness that plugs into the guage cluster.and you will have a working volt meter!ight latez
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM