A/C not working. What does it look like when clutch is engaged?
#1
A/C not working. What does it look like when clutch is engaged?
The compressor looks like its not working. The clutch if its the outside piece on the pulley does not spin.
Could this be the way I wired the haltech to it. The fan does turn on. Do I have to splice into the wire or actually disconnect it and wire the haltech the relay? current its just spliced into it.
Also were can I get the refridgerant for it? It costs like $400++ cdn to change it over!
Thanks,
Ian
Could this be the way I wired the haltech to it. The fan does turn on. Do I have to splice into the wire or actually disconnect it and wire the haltech the relay? current its just spliced into it.
Also were can I get the refridgerant for it? It costs like $400++ cdn to change it over!
Thanks,
Ian
#2
R.I.P. Monte Negro FD
iTrader: (1)
Join Date: Feb 2004
Location: NYC & Davie, FL
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
change that **** to 134A just get the retro fit kit at pepboys or something. well i dont know if hooking up the haltec had anything to do with it, but your compressor should spin once your a/c is on. the system is made, that if you dont have enough refrigerant in the system, the clutch will not turn on. i say, just dump the rest of the old 12 out and get like 4 cans of 134.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM