2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Buying Injectors

Thread Tools
 
Search this Thread
 
Old Nov 7, 2002 | 02:00 AM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 165
Likes: 0
From: long island, NY
Buying Injectors

i have a bone stock (exept for air filter) 87 GXL and i need injectors, i dont want to send mine out its too much hassle. i am stupid when it comes to this so i found a couple sets on ebay that im wondering if they will work. im assuming that just cuz it says "for dsm, civic etc..." doesnt mean it won fit my rx7 if they are the right size?

ONE

Don't know the size of these, maybe you guys do

THREE

if you guys can point me towards the right ones, or some other ones under $150 from anywhere else i would really appreciate it.

Last edited by [G o a T S L o n G]; Nov 7, 2002 at 02:16 AM.
Reply
Old Nov 7, 2002 | 03:02 AM
  #2  
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: Auckland, New Zealand
http://www.teamfc3s.org/store/default.php?cPath=26_27
Reply
Old Nov 7, 2002 | 03:14 AM
  #3  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 165
Likes: 0
From: long island, NY
those are all too big for my stock N/A and they are $100 each thats insane considering i need 4. im looking for affordability
Reply
Old Nov 7, 2002 | 03:38 AM
  #4  
88 SE's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2002
Posts: 818
Likes: 1
From: Phoenix
I think the injectors in listing #3 would work.
Reply
Old Nov 7, 2002 | 07:54 AM
  #5  
Ryde _Or_Die's Avatar
...
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 7,539
Likes: 0
From: Tampa, FL
Theres no way to tell without having used injectors cleaned and blueprinted whether they have an external leak or something else wrong with them. I bought 2 used injectors and had them sent out to be cleaned/blueprinted. They told me that one of them had an external leak and it would cost like $180 a piece to rebuild. I ended up just letting RC have them and bought 2 new ones. Moral of the story, you could spend alot more if you buy used injectors. BTW, whats wrong with your current injectors?
Reply
Old Nov 7, 2002 | 10:12 AM
  #6  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 165
Likes: 0
From: long island, NY
my car jerks like crazy all thru the rpm range in every gear, as if it wasnt getting enough fuel. im replacing the fuel pump and fuel injectors. i already replaced plugs,wires,fuel filter and none of this helped.
Reply
Old Nov 7, 2002 | 02:34 PM
  #7  
Ryde _Or_Die's Avatar
...
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 7,539
Likes: 0
From: Tampa, FL
I believe I suggested before for you to have your current ones cleaned. Whats wrong with doing that? Is it down time or what? It is the cheapest way to make sure you're getting good injectors($20 something/injector). Might want to try running some good fuel system cleaner to see if there is any improvement at all. If so then you would know its more than likely your fuel pump/injectors.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
imitek
3rd Generation Specific (1993-2002)
9
Aug 28, 2015 05:28 PM
morataya
Microtech
0
Aug 24, 2015 05:06 PM




All times are GMT -5. The time now is 12:43 PM.