LaSkt9

1. im in the process of putting in my fmic which of course didnt come with instructions
i got everything figured out just need some pics of where to cut out for the pipes by the headlights

2. is anyone using the apexi bov with their fmic set up? what side (cold/hot) did you mount it on

3. if i block off the pipe on the bac but leave it on will it mess with my idle? is it work connecting it to the intercooler pipe?

4. is anyone using the hks super mega flow intake with a fmic? i think i need to make a new intake pipe but i want to see what other people have done first

and i think thats it right now, thanks

dot_txt

iTrader: (1)

1. What brand FMIC. There are a number of setup pictures in the forum here as this question has been asked a good many times.

2. Hot side before IC.

3. Why not just remove the BAC if you plan on blocking it off. Otherwise leave it on and it will help idle. Just route the line to the Intake behind the AFM. Should not be too hard.

LaSkt9

greddy they all have the same pics i need ones of how much to cut from the left headlight area

ill just leave it and weld on a flange to the hotside and connect it to that

Aaron Cake

iTrader: (1)

Ideally, the BOV is to be mounted as close to the throttle body as possible.

Connect the BAC up as it is in the stock configuration. Run the hose from the BAC to the TID. The BAC is how the ECU controls the idle, so you'll want to keep it.

That's a crappy "intake". The foam filter is very poor.

LaSkt9

i know it came with the car and im too cheap to buy a new one