JWteknix

iTrader: (2)

ok im in the process of of redoing the complete brake system on my 88 se.

i am taking and upgrading all of parts from my 88 tII.
vac booster, calipers, master clyinder and porportioning block. All lines and fittings will be changed to -3 an SS braided hose and fittings. i will also be using B&M launch control. Some prior info from the 88 tII parts car previous owner deleted the ABS and ran all new hardlines from master to porportioning block to calipers.

So the master is rusted and leaking so I decided to purchase a reman unit from mazdatrix for an 88 tII w/ ABS b/c thats how the vehical came stock. I had no reason to beleive the master was changed when the previous owner deleted the ABS.

Now here is the problem I received the reman unit I ordered, and compared it to the old one. The reman unit only has 2 outputs for the lines (front and rear), and the old one has 3 outputs, 2 to the porportioning valve (1 for rear and 1 for the F/R corner of the vehical) and 1 to the F/L corner of the vehical. Now the question is, is the reman unit porportioned internally? if so can i just run one line out to the front and one to the rear and T them my self making equal length lines, or will I have to get different proportioning valve to split it

I already have all the lines, fittings, T's, and launch control
Thanx in advanced for any help.
James

JWteknix

iTrader: (2)

ok i figured it out thanx for all your help guys