ok so i bout this new tii and i was checking under the hood and replacing the turbo oil dump tube gaskets and noticed that the o2 wire was cliped. I looked arround in the comparment and couldent find the wire or the connector. I looked the wiring schmatic on my shops computer program and it said that it was a gray wire all the way to the ECU. First of all where the hell is the ECU. or can i just splice into the wiring loom to the ECU. I also found that there was a brown wire that as comming out of the IAC loom and was also cliped. Recked my brain looking for this so i thought i would ask the experts. This is my first FC and have had it for less that 2 weeks. dont know the car yet but any help would be greatly apprecieated.

 

under the passenger carpet, were there feet set. There is a metal plate gaurding it, I think the nuts are 10mm. The ecu I mean.

 

see my fruity *** pink wire with the yellow one. those are for the 02 sensor. just to give you a idea of where it is. it should be a sheilded gray wire.

 

ok so i bout this new tii and i was checking under the hood and replacing the turbo oil dump tube gaskets and noticed that the o2 wire was cliped. I looked arround in the comparment and couldent find the wire or the connector. I looked the wiring schmatic on my shops computer program and it said that it was a gray wire all the way to the ECU. First of all where the hell is the ECU. or can i just splice into the wiring loom to the ECU. I also found that there was a brown wire that as comming out of the IAC loom and was also cliped. Recked my brain looking for this so i thought i would ask the experts. This is my first FC and have had it for less that 2 weeks. dont know the car yet but any help would be greatly apprecieated.

 

the o2 sensor that he has in there is a single wire o2. is that right if so then i will try to find that gray wire with the two wires running in it.

 

bump