Bolt size for rear control links?
08-31-16, 03:09 PM
#1
Rotary Enthusiast
Thread Starter
Bolt size for rear control links?
The bolts for the rear control links (p/n FB01-28-092, 4 req'd) are no longer available from Mazda. Would anyone know the size, pitch and length of these bolts?
12-22-22, 07:09 AM
#2
Newbie
Join Date: Nov 2022
Location: Midwest
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Reviving a long dead thread because I had to figure this out. I bought the following and confirmed that they are direct replacements (though they have a slightly larger flanged head). Only difference is that they're not zinc yellow chromate (but still corrosion resistant) and they're actually class 10.9, which is the same as grade 8.
M10x1.25, 50mm Long
McMaster Part Number 95735A651: https://www.mcmaster.com/95735A651/
M10x1.25 Nut
McMaster Part Number 91028A421: https://www.mcmaster.com/91028A421/
M10x1.25, 50mm Long
McMaster Part Number 95735A651: https://www.mcmaster.com/95735A651/
M10x1.25 Nut
McMaster Part Number 91028A421: https://www.mcmaster.com/91028A421/
12-22-22, 10:35 AM
#3
If you must have zinc yellow chromate, Belmetric is the place to go. They are available there:
https://belmetric.com/jis-flange-bol...10X1.25X50PYLW
https://belmetric.com/jis-flange-bol...10X1.25X50PYLW
Thread
Thread Starter
Forum
Replies
Last Post
Mindspin311
2nd Generation Specific (1986-1992)
6
07-30-07 10:13 AM