Blown Room 7.5 Fuse
#1
Newbie
Thread Starter
Join Date: Jun 2004
Location: Calgary
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Blown Room 7.5 Fuse
I blew my Room 7.5 fuse (twice already), not too sure why. Once I put in the new fuse it's fine, but as soon as I put the car in reverse then it completely cuts out all cluster to the left of the speedometer, the heater and the idiot lights (ie. e-brake light, fuel, etc.) Does it anyone know what this is caused from?
Thanks for the help,
Eugene
Thanks for the help,
Eugene
#2
Rotary Enthusiast
Join Date: Aug 2005
Location: OH
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
check you light bulb and see if that has anything to do with it. i just use a 10a but i dont know if thats bad for the car or not.
i have a question that might help, will it effect the car if you pull or put in a fuse while the car is on or in ign? like can it short something out?
aslo, why doesnt my power door lock work anymore, i pulled the antenna ign and antenna B. both of those are just for the antenna right?
sorry if it seems like i was trying to highjack... im not, just didnt want to start a new thread and thought this might help him.
i have a question that might help, will it effect the car if you pull or put in a fuse while the car is on or in ign? like can it short something out?
aslo, why doesnt my power door lock work anymore, i pulled the antenna ign and antenna B. both of those are just for the antenna right?
sorry if it seems like i was trying to highjack... im not, just didnt want to start a new thread and thought this might help him.
#3
Former Moderator. RIP Icemark.
The reverse lights, meters are not on the Room fuse, but rather the Meter Fuse.
If you are blowing the Meter fuse chances are you have the reverse light switch wires shorted or damaged. Have you had transimssion or clutch work done recently???
If you are blowing the Meter fuse chances are you have the reverse light switch wires shorted or damaged. Have you had transimssion or clutch work done recently???