Blown motor, what parts would I need?
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: BossTown, MA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Blown motor, what parts would I need?
Ok, some of you might have read my thread about me blowing up my motor a month or so ago. If not, heres the thread: https://www.rx7club.com/showthread.p...4&page=1&pp=15
I am shopping for my rebuild now, I am thinking of getting Rotary Aviation's Basic Overhaul kits for the 13B. You can see it here (http://www.rotaryaviation.com/overhaul_kits.htm). Is this all that I need? Are the 13B kits for 13B-T also?
Also, I know that I will most likely need to get rotor housing for the rear rotor because that is most likely damaged, would I need irons or rotor? Is there anything I need to do to my current iron or rotor, like machine it or anything?
Inputs will be greatly appreciated.
~Dave
I am shopping for my rebuild now, I am thinking of getting Rotary Aviation's Basic Overhaul kits for the 13B. You can see it here (http://www.rotaryaviation.com/overhaul_kits.htm). Is this all that I need? Are the 13B kits for 13B-T also?
Also, I know that I will most likely need to get rotor housing for the rear rotor because that is most likely damaged, would I need irons or rotor? Is there anything I need to do to my current iron or rotor, like machine it or anything?
Inputs will be greatly appreciated.
~Dave
Last edited by SwiftTone; 04-15-06 at 04:00 PM. Reason: update URL
#4
Senior Member
Thread Starter
Join Date: Apr 2001
Location: BossTown, MA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kungfuroy
You will really have to open it up and check that everything is in spec tolerances. Those kits are pretty much made on the notion you are using good parts.
Thread
Thread Starter
Forum
Replies
Last Post