Blitz Turbo Timer Installation Help
#1
Full Member
Thread Starter
Join Date: Jul 2003
Location: So. California
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Blitz Turbo Timer Installation Help
I have a Blitz FATT that I started installing. The english instructions refer to the Blue wire as the Accessory. However, the actual harness has the Accessory in white wires (not the problem).
Anyway, I connected the 12v constant, 12v ignition, and Accessory to the starter coupler. I finished grounding or connecting any remaining wires, but there is still a small white wire with a little connecter that just hangs off one of the clips.
I am assuming that it is part of the Accessory because it is white, but what do I do with it? I can't find anything in the instructions about it.
Anyway, I connected the 12v constant, 12v ignition, and Accessory to the starter coupler. I finished grounding or connecting any remaining wires, but there is still a small white wire with a little connecter that just hangs off one of the clips.
I am assuming that it is part of the Accessory because it is white, but what do I do with it? I can't find anything in the instructions about it.