blitz turbo timer install help
05-06-03, 06:23 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: so cal
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
blitz turbo timer install help
ok i got a blitz turbo timer form the previous owner. with no instructions or anything. idownloaded the greddy pdf file though...but heres my main question...on the greddy one it has a brown wire that hooks up to the parking brake. on mine there are 2 wires..i think one red and one white..both have been snipped wite at the plug..so i cane even use them..unless maybe i solder...do i need these? and what exactly does the parking break wire do?> just let the car know the car is parked?
05-06-03, 07:55 PM
#3
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
i installed a Blitz TT yesterday.
just ground the purple. I always use my parking break so it's pointless to me.
Are there any harness left on the timer? Or was there even a rx7 harness on the timer?
just ground the purple. I always use my parking break so it's pointless to me.
Are there any harness left on the timer? Or was there even a rx7 harness on the timer?
05-06-03, 08:57 PM
#4
Senior Member
Thread Starter
Join Date: Jan 2003
Location: so cal
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
yes there is a harness..but u kno the second harness that comes off it..with the 3 wires there..one being purple..supposed to go to the speedo i think..and then the other 2...are the other 2 supposed to go to the break? and so u just grounded the purple that was supposed to the speedo? wat does the parking wires do anywayz?
