Bearing problem???
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Apr 2007
Location: OKC
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Bearing problem???
I've just replaced the bearings in the front two wheels, replacing both inner and outer bearings with the seal. But for some reason, when i put the wheel back on, both sides still kinda wobbles as if it still has a bad bearing. Could something else be loose?? Right now i have no idea whats going on...
#3
SCCAEP
iTrader: (3)
Join Date: Dec 2006
Location: Dallas
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Did you change the bearing races? http://www.mazdatrix.com/faq/frontbrg.htm
Tighten the bolt enough? I tighten it with some force to set the bearings, then back it off and tighten lightly. Not sure on ft/lbs but it's probably in the FSM.
The wheel bearings should be a straight forward install. Maybe something else is loose.
Tighten the bolt enough? I tighten it with some force to set the bearings, then back it off and tighten lightly. Not sure on ft/lbs but it's probably in the FSM.
The wheel bearings should be a straight forward install. Maybe something else is loose.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM