sorry if this is a repost, but ive spent several days searching to no avail.

working on a 86 and swaping in a t2 motor. we have the jdm s4 t2 harness, and a s4 na harness. what wires will i have to put in the na harness to work it right, and does anyone know the bare minimum of what wires i need to make the motor run properly? the original harness in the car burned up when it was na.

i have already gotten rid of all the emissions stuff, and all im worried about is making the car run right with a stock t2 ecu.

i have noticed that the na harness we have has different injector clips than the turbo one that came with the motor. (its the same as another s4 na) can i just wire the turbo ones up in place of the na clips? and other than the maf, tps, injectors, and temp plugs, what else will we need?

thanks
-jamie

 

i guess nobody know? i did find this link posted in the 1gen section, and was wondering if this will work for the stock s4 stuff?

the link

 

Rotaryresurrection.com has a very good writeup on this, you might check it out.