BAC valve idle adjust screw?
Thread Starter
Full Member
Joined: Jan 2006
Posts: 51
Likes: 0
From: Alabama
BAC valve idle adjust screw?
Hey guys, what can be used for a the idle adjust screw on a t2 bac valve? Not what can be used to turn it 
, what screw will work? Im putting one back onto a 87 but theres nothing there on the bacv but air.
, what screw will work? Im putting one back onto a 87 but theres nothing there on the bacv but air.
FSM might have that info. A junk yard would work though. Sorry I can't tell you more. Actually I'll be removing my BAC valve to replace it soon, however the screw should be fine. Maybe I could send it to you for $5
Winter sucks
Joined: Jan 2004
Posts: 3,083
Likes: 0
From: Newberg, Oregon
You sure your bac valve CAN have it? is there a hole where the screw would go? or does it look like its filled in at the base? Some BACV's don't have adjustment ability. My S5NA doesn't...
Thread Starter
Full Member
Joined: Jan 2006
Posts: 51
Likes: 0
From: Alabama
Yeah, if anyone has one ill pay 5 plus shipping just to be cautious.
Checked the fsm mannyyy times, but no luck.
And ya, the hole goes all the way through, so there's 4 holes on the gasket side: 2 bolts, idle screw and the large opening.
Checked the fsm mannyyy times, but no luck.
And ya, the hole goes all the way through, so there's 4 holes on the gasket side: 2 bolts, idle screw and the large opening.
Thread
Thread Starter
Forum
Replies
Last Post
FD3S_wanted
Suspension/Wheels/Tires/Brakes
4
Sep 22, 2015 06:18 PM
