2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

BAC & ABV to new IC ???

Thread Tools
 
Search this Thread
 
Old Jan 13, 2013 | 05:21 PM
  #1  
tworotorguy's Avatar
Thread Starter
dos-rotor
Tenured Member 10 Years
 
Joined: Jan 2005
Posts: 220
Likes: 0
From: New Hampshire
BAC & ABV to new IC ???

just installed new fmic kit and baffled as my searches turned up little info on what to do with the lines from the bac and abv that went to the stock intercooler...
Reply
Old Jan 13, 2013 | 06:30 PM
  #2  
texFCturboII's Avatar
version 2.0
Tenured Member 15 Years
iTrader: (17)
 
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
Pipe them in, pre-throttle body somehow.
Reply
Old Jan 13, 2013 | 06:48 PM
  #3  
AGreen's Avatar
Trunk Ornament
Tenured Member: 15 Years
iTrader: (11)
 
Joined: Sep 2006
Posts: 3,054
Likes: 2
From: Goose Creek, SC
Drill and tap holes in the intercooler piping, thread in a brass barb fitting, connect hoses.
Reply
Old Jan 13, 2013 | 11:34 PM
  #4  
ben.farnath's Avatar
Rotary Enthusiast
 
Joined: Sep 2010
Posts: 827
Likes: 12
From: new zealand
Originally Posted by AGreen
Drill and tap holes in the intercooler piping, thread in a brass barb fitting, connect hoses.
+1 though probably don't have to tap it as it's most likely ally. I was able to just thread in with some Rtv on the thread so it didn't leak.
Reply
Old Jan 14, 2013 | 06:13 PM
  #5  
tworotorguy's Avatar
Thread Starter
dos-rotor
Tenured Member 10 Years
 
Joined: Jan 2005
Posts: 220
Likes: 0
From: New Hampshire
I kinda figured as much, thanks guys
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PinkRacer
2nd Generation Specific (1986-1992)
43
Oct 1, 2015 09:13 AM
Rotafuzz
New Member RX-7 Technical
3
Sep 30, 2015 09:55 AM
blackball7
2nd Generation Specific (1986-1992)
9
Sep 20, 2015 08:33 PM




All times are GMT -5. The time now is 09:57 PM.