i just installed an apexi afc in my 88 t2. i would like to know what i should set the settings at. my mods are RB downpipe/presilencer, greddy pe cat back, k&n cone filter, and an apexi avcr. i run about 10-11 lbs of boost. thank you!

 

Do you have larger injectors?

 

You have to tune it car specific. Id say get it dyno'd for best results. Or get a nice a/f gauge and egt and diff. 02 sensor. hope I helped

 

Here is how I have mine set. I run close to 15 PSI.
Throttle Point-LO=80% HIGH=99%
1000 RPM-LO=0% HIGH=0%
2000 RPM-LO=0% HIGH=0%
3000 RPM-LO=0% HIGH=0%
4000 RPM-LO=1% HIGH=2%
5000 RPM-LO=3% HIGH=4%
6000 RPM-LO=5% HIGH=6%
7000 RPM-LO=7% HIGH=8%
8000 RPM-LO=9% HIGH=10%
This is with the following mods.

*********** 87 Mazda RX-7 Turbo II ************
*88 J-Spec Engine *TO4 Proturbo *Throttle Body Mod.
*Greddy Turbo Timer *Greddy A/F Meter & O2 sensor *RB Sway Bars
*Greddy FMIC *Greedy Type R BOV *Walbro Fuel Pump *720cc Secondaries
*Apex SAFC *Apex S-AVCR Boost Controller *Apex GT Exhaust
*Bonez Downpipe *Bonez Intake *Bonez Street/Strip Clutch
*ACV Removal *Fuel Pump Re-wire *Ported Wastegate
*Jacobs Rotary Pro Ignition *Magnecore 10mm Wires *RB FCD
*Red Silicone Vacuum Lines *Optima Red Top Battery
*Falken Tires-205/55/R16-Front Nitto NT-555R 225/50VR16-Back
**************************************
*2700 LBS. *274 RWHP *0-60 MPH @ 4.8 sec.
*1/4 mi. 12.8 sec. @ 110.5 MPH 14 PSI
*********** MOVIES ************
http://gallery.rx7club.com/images/videos/100plus.avi
http://gallery.rx7club.com/images/videos/burnout.avi
http://gallery.rx7club.com/images/vi...urbo-incar.avi
http://gallery.rx7club.com/images/videos/TurbovsNA.avi
http://rx7club.wegov2.com/file_depot...nertakeoff.avi
http://rx7club.wegov2.com/file_depot...irst2third.avi
http://rx7club.wegov2.com/file_depot...111/inside.avi
http://home.rmci.net/panther/13_7.avi
*************************************************
*See at: <http://home.rmci.net/panther>/turbo.htm

*************************************************

 

no i dont have bigger injectors yet. i have just ordered the 720cc injectors and the walbro fuel pump. just waiting for them to come in.


thanks RXTASY1