Anyone used MOA Friction fighter in their rotary before?
09-08-06, 12:58 PM
#1
Anyone used MOA Friction fighter in their rotary before?
A friend of mine gave me a can of this stuff and I am unsure about using it. It is made by BG Products if that helps. I premix, so it will not be getting burnt. Any help would be great.
Thanks
Thanks
09-08-06, 01:08 PM
#2
Former Moderator. RIP Icemark.
snake oil is snake oil...
If you are using a good quality oil that meets SF or better standards then there is no reason for friction modifiers other than to throw away your money and distroy your motor.
Go read Bob the oil guy (http://www.bobistheoilguy.com/images/lucas/lucas.htm) information on snake oils/friction modifiers.
If you are using a good quality oil that meets SF or better standards then there is no reason for friction modifiers other than to throw away your money and distroy your motor.
Go read Bob the oil guy (http://www.bobistheoilguy.com/images/lucas/lucas.htm) information on snake oils/friction modifiers.
Last edited by Icemark; 09-08-06 at 01:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM
