Anyone make a whale-tale for the FC?
#2
Meesto Spakaro
Join Date: May 2001
Location: Redondo Beach, CA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
R Magic makes them. Only available in Japan, which means expensive. One of my friends has one for sale, as well as his R-Magic vented hood.
You may be able to find a knockoff, but i would be wary of the construction and how thick the fibreglass is-- cheaper knockoffs use lower grade fibreglass in thin thin layers that will warp very easily in a short amount of time/heat.
You may be able to find a knockoff, but i would be wary of the construction and how thick the fibreglass is-- cheaper knockoffs use lower grade fibreglass in thin thin layers that will warp very easily in a short amount of time/heat.
#4
Meesto Spakaro
Join Date: May 2001
Location: Redondo Beach, CA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
#7
working towards the goal
Join Date: Apr 2004
Location: Georgia
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Well. I'd say that the whale tale style looks much better than 99% of the aluminum wings out there.
Icemark, do you know of a better styled wing for the FC?
Icemark, do you know of a better styled wing for the FC?
Trending Topics
#11
Former Moderator. RIP Icemark.
Originally Posted by Drag'nGT
Well. I'd say that the whale tale style looks much better than 99% of the aluminum wings out there.
Icemark, do you know of a better styled wing for the FC?
Icemark, do you know of a better styled wing for the FC?
#12
Banned
Originally Posted by Icemark
I thought EWWW before I even saw the pictures
#14
Originally Posted by soulja77
^^^^ i want those rims.. how much do you think they cost
-Joe
#15
knowledge junkie
Honestly... in person the "trunkback" hatch replacements and whale tales aren't that bad. I'd never do one, but they're different and unique looking. Available for all 3 generations rx-7s.
#16
...94% correct.
Thread Starter
None of those are really what I had in mind...
I'm gonna take this on as a project...sometime...
What I want is a wing that follows along the bottom edge of the hatch. At it's highest it's only going to be maybe 2 or 2.5 inches above the deck, and maybe travel 4 inches over past the rear deck and meet flush with the glass. I'm thinking the leading edge shoulg kind of curl up so that the transition between the glass and the wing is smooth, and the trailing edge would be curled down (like on a real whale-tail style spoiler).
I'll find a pen and draw up what I'm talking about right quick...
I'm gonna take this on as a project...sometime...
What I want is a wing that follows along the bottom edge of the hatch. At it's highest it's only going to be maybe 2 or 2.5 inches above the deck, and maybe travel 4 inches over past the rear deck and meet flush with the glass. I'm thinking the leading edge shoulg kind of curl up so that the transition between the glass and the wing is smooth, and the trailing edge would be curled down (like on a real whale-tail style spoiler).
I'll find a pen and draw up what I'm talking about right quick...
#19
...94% correct.
Thread Starter
yup...that's a dent...
...and no...what I want to make will be more of an acent to the hard lines of the car. Most of these tails shoot up at abrupt angles and scuh...
...and no...what I want to make will be more of an acent to the hard lines of the car. Most of these tails shoot up at abrupt angles and scuh...
#23
Like Ghandi with a gun
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes
on
0 Posts
Hey, found this thread from a couple years ago, has a decent looking whale tail: http://www.teamfc3s.org/forum/showth...?threadid=2378
#25
Like Ghandi with a gun
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rxecret7.com/ is a distro, they can probably get whatever you need from there, but i doubt theyd have anything in stock, so be prepared to wait