Anyone got any instructions for turbo applications
07-23-06, 02:20 PM
#1
Full Member
Thread Starter
Join Date: Jul 2006
Location: Edmonton Ab
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Anyone got any instructions for turbo applications
I need proper instructions with pictures to help me with my turbo swap
im putting a xs engineering t04e turbocharger
anything would help right now
thanx
im putting a xs engineering t04e turbocharger
anything would help right now
thanx
07-23-06, 05:42 PM
#4
Full Member
Thread Starter
Join Date: Jul 2006
Location: Edmonton Ab
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Performance: (I: Installed) (NI: Not Installed)
- 4 point CP Racing Engine Strut Bar (installed)
- CP Racing roll cage (not installed)
- 3 inch to dual 2 ½ inch exhaust with Fireball Exhaust mufflers (installed)
- 3 inch Thunder Fabrication Down pipe (replaces catalytic converter)(NI)
- HKS exhaust manifold for TO4E/TO4B turbochargers (NI)
- Oil Feed for turbocharger includes pressure measurement guage and nitrous fittings to regulate flow (NI)
- Oil Drain (1 inch drain 90 degree bend)
- TO4E XS power Garett Style Super T04E (almost new and never put under boost)(exhaust v-band clamps included) (NI)
- TO4E Garett Diesel (Information listed in draft drawing) (exhause clamps and adapters included)(Used) (NI)
- Trust brand adjustable waste gate (NI)
- HKS style waste gate (7 different pressure springs included) (NI)
- Intercooler Piping 2 ½ inch with all Silicone couplings and metal clamps included (NI)
- Monster Brand intercooler (very large core can be used 500 + hp 3 inch entry and exit)(NI)
- Starion intercooler (good for mild upgrades or low boost.. current piping does NOT match for this intercoolers exits and entry's) (NI)
- Turbo XS Adjustable Blow off Valve
- RE-Ayenami Intake with dual pre throttle body fuel injectors
- Two 700-800cc injectors (has to be tested for exact cc.. never tested!) (NI)
- Turbocharger insulating kit
- Slotted and drilled Brembo brake rotors (Intalled)
- Solaflex rising fuel pressure regulator (NI)
- Apexi S-AFC Fuel regulation computer (Installed)
- Adjustable performance shocks 4 different settings (Installed)
- Dual Friction Centerforce clutch and pressure plate (new) (NI)
What would be the best combination to run any advice
- 4 point CP Racing Engine Strut Bar (installed)
- CP Racing roll cage (not installed)
- 3 inch to dual 2 ½ inch exhaust with Fireball Exhaust mufflers (installed)
- 3 inch Thunder Fabrication Down pipe (replaces catalytic converter)(NI)
- HKS exhaust manifold for TO4E/TO4B turbochargers (NI)
- Oil Feed for turbocharger includes pressure measurement guage and nitrous fittings to regulate flow (NI)
- Oil Drain (1 inch drain 90 degree bend)
- TO4E XS power Garett Style Super T04E (almost new and never put under boost)(exhaust v-band clamps included) (NI)
- TO4E Garett Diesel (Information listed in draft drawing) (exhause clamps and adapters included)(Used) (NI)
- Trust brand adjustable waste gate (NI)
- HKS style waste gate (7 different pressure springs included) (NI)
- Intercooler Piping 2 ½ inch with all Silicone couplings and metal clamps included (NI)
- Monster Brand intercooler (very large core can be used 500 + hp 3 inch entry and exit)(NI)
- Starion intercooler (good for mild upgrades or low boost.. current piping does NOT match for this intercoolers exits and entry's) (NI)
- Turbo XS Adjustable Blow off Valve
- RE-Ayenami Intake with dual pre throttle body fuel injectors
- Two 700-800cc injectors (has to be tested for exact cc.. never tested!) (NI)
- Turbocharger insulating kit
- Slotted and drilled Brembo brake rotors (Intalled)
- Solaflex rising fuel pressure regulator (NI)
- Apexi S-AFC Fuel regulation computer (Installed)
- Adjustable performance shocks 4 different settings (Installed)
- Dual Friction Centerforce clutch and pressure plate (new) (NI)
What would be the best combination to run any advice
Thread
Thread Starter
Forum
Replies
Last Post