Any oil addative help with burning oil (already premxing)
03-27-04, 04:34 PM
#1
Like Ghandi with a gun
Thread Starter
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes
on
0 Posts
Any oil addative help with burning oil (already premxing)
Hey guys. I'm still getting some blue smoke on startup (startup +2-3 mins only). I used a radiator seal addative, and I have much less smoke on startup now. But what is smoking is defiantely blue now, instead of whiteish... very light blue. Anyhow... is there any additive that might help reseal the oil seals w/o a rebuild? I've already gone premix and the omp is completely blocked off.
Any ideas? Thanks
Any ideas? Thanks
03-27-04, 06:39 PM
#5
Like Ghandi with a gun
Thread Starter
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Project84
You didn't put the radiator additive in the oil system did you?
You didn't put the radiator additive in the oil system did you?
03-27-04, 08:11 PM
#7
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
That rad additive is in the process of clogging every cooling passage in the engine and rad. If I were you, I would immediately drain and flush the system, fill with coolant, go for a drive, then repeat until all that crap is gone.
Small amounts of smoke on startup is normally for a mid-of-life rotary. Unless you are constantly billowing oil smoke, I wouldn't worry about it.
Small amounts of smoke on startup is normally for a mid-of-life rotary. Unless you are constantly billowing oil smoke, I wouldn't worry about it.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM
