You know, i've searched the boards, read every thread on here that I could find about using a relay and how to wire it up. There are exactly 3 DIFFERENT wiring explanations in all of these threads which are linked together. I find that amusing that they all link to each other yet if you look closely, the actual diagrams and explanations are all different as to what wire is connected to what.

Talk about confusing. Based on the Adobe file that is attached here....

http://www.installdr.com/TechDocs/999311.pdf

it appears to be the most understandable and correct. I'm going to go wire the relay according to it, which is different from the other two wiring diagrams/explanations. I'll post the results when i'm finished and let you folks know if it worked.

Later,
Billiard

 

Please read the FAQ for FC sticky thread before posting. It has many of the commonly asked questions (like the one you started this thread with) answered.

Thread closed. Covered in the FAQ for FC sticky thread found at the top of this 2nd gen technical section.

And please do not post an additional threads on this. Again it is covered in the FAQ for FC sticky thread that you should have read before posting.