Ok.

On the engine wiring harness for my 89 TII, there are sets of connectors that go to the injectors. There are 2 near the very end of the harness, and another 2 about a foot prior to that.

My question is, do the 2 at the end connect to the 2 on the rear housing, and the front plug into the 2 on the front housing

-OR-

Do 2 on one branch connect to corresponding injectors (ie both primaries, or both secondaries), and the other 2 connect to the other corresponding ones?

If anyone could just run out to their car and have a look, or knows it off the top of their head it would be great!

Thanks

 

Oh, the wire colors are:

1 - Light Green w/ No Stripe
2 - Light Green w/ White Stripe
3 - Light Green w/ Red Stripe
4 - Light Green w/ Black Stripe

At least it looks light green

 

if i am understanding correctly.... the wires that are paired that are longer go to the secondaries.. (branch as you described it) ie.. the "Y" contains both primaries and the other is both secondaries... check the wiring harness elec layout with a diagram. If you are running the stock computer there is a fuel cut at 6psi or somthing like that. it cuts fuel to the rear rotor. i dont know what kind of effects this would have if you cut fuel to the front.

check the service manual wiring tho before you do anything .

there is one online at

www.fc3s.org

dave
87 TII (Series 5 Conversion)

 

it is in the back of the haynes manual listed as the wire color


dave

 

Thanks,

But I couldn't find it in the FSM. what section is it in?
And I don't have my haynes guide with me, but I never realized it had a guide