Alternative FC Headlights (projector)
#1
Freebasing mountain roads
Thread Starter
Alternative FC Headlights (projector)
I have spent the last few hour compiling a list of things and parts numbers from various sites. Some of you may have seen these headlights before, but I am almost certain that I am going to purchase these in the next few months, among other things, struts, springs, carbonfiber TII hood, etc. Anyways, I though I would see what you think of these as a replacement for the OEM sealed beam.
Also, those that already have these, what is you impression? $93.00
http://bodykits.com/store/product.ph...at=3916&page=1
Also, those that already have these, what is you impression? $93.00
http://bodykits.com/store/product.ph...at=3916&page=1
#3
DONT BUY THEM. my boy snack has them and there the biggest piece of ****! the projection ball thingy falls off and rocks around your lenses and plus even the it they still look like ****.
over and out.
over and out.
#4
Freebasing mountain roads
Thread Starter
I also found some on ebay, they had the blacked-out projectors, and non projector crystal angeleyes. Im not to crazy about the "square"angeleyes, but the bkack-outs looked nice. I went to check recently, and couldnt find any. Anyways, these seem to be decent quality, and if they f'up then I can send them back. Also in the market for a good set of the Jspec FTP lights.
Trending Topics
#10
Freebasing mountain roads
Thread Starter
#11
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If you would like Brighter Lights,Better than these Pieces of Garbage,get the Hella Lamp replacements.They are basically the Sealed beams,without a Bulb.You have your Choice of Whatever you want to put in.Another Route to go would be Sylvania Silverstar Headlamps @ approx 25-35 bucks a piece.I have these on my FC and they are a good quality Light.I can light up a good 1/10 of a mile(seriously).I am always getting "told" to lower my High beams,even when they are not on High!..and I have had the lamps Positioned Correctly when I installed them.I'm not Trying to be all High and mighty,I just cringe every time that someone takes thier Money and Buys the Crap that EBay has..the Only Bright about Those Bulbs Is the Advertising!.(because it seems to Work!).
#14
Another Route to go would be Sylvania Silverstar Headlamps @ approx 25-35 bucks a piece.I have these on my FC and they are a good quality Light.I can light up a good 1/10 of a mile(seriously).I am always getting "told" to lower my High beams,even when they are not on High!
#15
Senior Member
iTrader: (3)
Join Date: Sep 2004
Location: San Luis Obispo, CA
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
I will third the notion. I think it's not only the bright bulb, but the glass seems to be cut so the light is thrown appropriately. You can almost see around a turn with how far they light to the side.
#17
OMG ITS A TRIANGLE!
Join Date: Jan 2006
Location: San Francisco
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rallylights.com/hella/200mm.asp
its not bad about 80 bucks for a pair and comes with lights
its not bad about 80 bucks for a pair and comes with lights
#20
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rallylights.com/hella/200mm.asp
its not bad about 80 bucks for a pair and comes with lights
its not bad about 80 bucks for a pair and comes with lights
i been looking for a good pair. to bad icemark dont sel his HID's anymore
#22
#FakeCarEnthusaist
iTrader: (10)
http://www.retro-solutions.com/DIGITAL.html
http://www.therpmstore.com/product_i...roducts_id=336
#23
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
Get an H4 non-sealed beam housing and get an HID kit
http://www.retro-solutions.com/DIGITAL.html
http://www.therpmstore.com/product_i...roducts_id=336
http://www.retro-solutions.com/DIGITAL.html
http://www.therpmstore.com/product_i...roducts_id=336
and do those kits fit in our housings???
as you can tell NOOB!!
i never read into the HIDS yet.
#25
OMG ITS A TRIANGLE!
Join Date: Jan 2006
Location: San Francisco
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts