altenator wiring help
#1
Newbie
Thread Starter
Join Date: Sep 2006
Location: nm
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
altenator wiring help
I'm installing a micro tech ecu in a 1987 car with a 91 turbo egine and need to know where to tie in the alternator warning wire? I do not have the stock harness hooked up any more and need to know where to run the alternaor warning wire? Also I would like to know if any one knows which wire on the fuel pump is the positive and negative wires. There are four wires coming out of fuel pump area. please help...
Last edited by sese; 09-13-06 at 11:43 PM.
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
You need to be studying the FSM wiring diagrams. All the answers to your questions are in there. If you don't have them, click here and download them in PDF format for free.
For the alternator look on page 50-18 for the wiring and the next page for the connectors. Extract the alternator plug and wires from the removed EFI harness and connect them back into the front harness connector they were originally fed from (FEM-01).
For the fuel pump look on page 50-36. The pump power is blue and the ground is black. The other two wires are for the fuel gauge and warning light (see page 50-40).
For the alternator look on page 50-18 for the wiring and the next page for the connectors. Extract the alternator plug and wires from the removed EFI harness and connect them back into the front harness connector they were originally fed from (FEM-01).
For the fuel pump look on page 50-36. The pump power is blue and the ground is black. The other two wires are for the fuel gauge and warning light (see page 50-40).
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM