Advice from other RX fans needed
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: Lino Lakes MN
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Advice from other RX fans needed
Hey everyone, Im pretty new to the form
Anyway Im lookin for some advice, I just bought an 88 SE and looking for some advice
First off Ive been making slight body mods, I put on some 1990 side mirriors (because those black ones 86-88 are ugly ) hehe and put on some 1990 taillight (the old ones were not bad, I jsut think the new ones look cooler)
I have had soem problems installing the taillight though, all the bolts are secure on the inside but they dont quite fit, i know tehy are supposed to fit all gen 2 models except the convt. The lights dont fit flush with the body. My question, Is this because my license plate frame is still from the 88 model and the 90 lights jsut dont fit right with it?
If anyone else has had problems like this please send me an email to Schilling@stribmail.com
Also advice on general performance mods i Can do
Ive got Racing Beat Headers and some HKs Exhust that the previous owner added and a K&N air filter
What other basic stuff can I do to give it a little from Pep?
Thanks everyone
Have a nice day
Anyway Im lookin for some advice, I just bought an 88 SE and looking for some advice
First off Ive been making slight body mods, I put on some 1990 side mirriors (because those black ones 86-88 are ugly ) hehe and put on some 1990 taillight (the old ones were not bad, I jsut think the new ones look cooler)
I have had soem problems installing the taillight though, all the bolts are secure on the inside but they dont quite fit, i know tehy are supposed to fit all gen 2 models except the convt. The lights dont fit flush with the body. My question, Is this because my license plate frame is still from the 88 model and the 90 lights jsut dont fit right with it?
If anyone else has had problems like this please send me an email to Schilling@stribmail.com
Also advice on general performance mods i Can do
Ive got Racing Beat Headers and some HKs Exhust that the previous owner added and a K&N air filter
What other basic stuff can I do to give it a little from Pep?
Thanks everyone
Have a nice day
#2
Refined Valley Dude
Join Date: Oct 2001
Location: Kitchener, Ontario (Hamilton's armpit)
Posts: 2,283
Likes: 0
Received 2 Likes
on
2 Posts
Mods (this gets asked a LOT):
https://www.rx7club.com/forum/showth...hreadid=169194
https://www.rx7club.com/forum/showth...hreadid=169194
#3
Moderator
iTrader: (1)
Welcome To The Forum.
Here, you'll find detailed Info on your problem.
http://www.aaroncake.net/RX-7/taillights.htm
I carefully clipped of the edges of the s4 Licence Plate trim to accomadate the s5 Taililights however. You wouldn't even notice It If you were to look at It.
Here, you'll find detailed Info on your problem.
http://www.aaroncake.net/RX-7/taillights.htm
I carefully clipped of the edges of the s4 Licence Plate trim to accomadate the s5 Taililights however. You wouldn't even notice It If you were to look at It.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM