on my 7, the adjustment screw on the top side of the throttle body is all the way out. when I adjust the screw in all the way, and then out 2.5 turns (like on a carb mixture screw on a dirtbike) the engine does not like to start very easily.
is there something i should be looking for that would let me adjust this bit to what seems to me a more reasonable setting?
thanks in advance.

~suds

 

umm, make sure the TPS is adjusted as per the FSM, then use that air idle screw to FINE tune it

 

ahh~ yeh, i'm thinking my tps is way outta wack then. but, what should i be running with the fine adjustment screw? 2.5out or ?.?out
thanks

~suds

 

umm actually i have no idea, i just got the tps set right, then i used the idle screw to get my idle to sit at 800, no certain amount of turns, think of it as a microscope, get the coarse adjustment, as its most important, then set in the fine adjustment

 

ok
i'll just adjust it to "middle" and then go from there.
thanks a bunch dude
~suds