HEy guys... I know I will get SO FLAMED =), cuz not only am I going single on an N/A with ported motor but I also got the biggest ricest MUfller eva take a look... Is 18 inches long with out counting the inlet and 4 inch wide TIP!!!! It has a silencer that brings the output to 2.0 and the inlet is 3.0. I have a racing beat header and I already bought the RB presilencer getting it welded then adding an 18 inch magnaflow resonator to this muffler. It is a tanabe Racing medallion. Well enjoy the pics. FLAMES ARE WELCOME =)

 

when I see a muffler that big I always think the owner must be trying to compensate for having something really small in their pants

 

Hey, watch it.... some of use purchased our FCs with those contraptions stuck on there and would rather spend money fixing more important things. :P

 

HAHAHAHAHHAHAHAHAHHA you found my secret. You guys think ill be loud as hell? You think maybe ill get any back pressure?

 

purchase is one thing, buying the big muffler and actually putting it on your car is another..

 

Oh come on dood...

 

I used to have two Apex-i N1 mufflers, one on each side. It was abnoxiously loud cruising at 3k. My friends called them the water melon cannons and said I could smuggle mexicans in them.

 

Keep is over your arm, and pretend to be Mega Man.

 

rotary gonna be loud? haha i doubt it. with that muffler your car will sound like stock. well maybe not stock but "signature sound"




sorry dude its gonna be loud.

 

Backpressure? This is not a honda. No backpressure required. When you get them welded on make sure you ask for the JDM Angle down so it looks REALLY terrible.

 

Oh lighten up you rich bastards.... There is nothing wrong with a freaking "ricer" muffler....... I am not a fan of the single outlet, but different strokes for different folks... Here is my (god forbid) non-racing beat setup on my old 7....

Racingbeat header
Catco freeflow cat
Racing beat Y section
2- 4inch tip EFX N1 style mufflers

 

RRTEC i like your car it looks good

 

I Have a Dual Apexi n1 3.5 inch tip it look good and sounds great

 

Oh, I'm not bashing huge tips, I have an Apex'i N1 Single... but at least it's "Rice done right".

Like jasmine rice instead of uncle bens. mmmm jasmine rice.

 

I thought that the 86-88 NA's needed backpressure to operate the 5th and 6th ports.

These are IYO the riceiest pipes I could have put on then. Hey I even got em angeled up and out. RB headers to a custom 2.5" mid pipe/y-pipe, to super cheap mufflers (unworthy of naming brand). Oh dont worry about them being loud, they will be. I've had a buddy of mine tell me that he can hear me at redline on the freeway late at night. His house is about 2-2.5 miles away. People know when Im exiting the freeway to go to my bros. Thats about half a mile away.

Im not proud of my exhaust choice, but it was ALOT less money than the RB full exhaust. I now want an RB full exhaust though since having to start carring earplugs in my glove box for passengers.

 

I Love the look on peoples faces when I fly by their car and shift from 2nd to 3rd and they hear that earth shattering POP, and they know that I harness the power to fry the **** out of thier front bumber. 18" blue flames are no joke.

 

Not the same thing, It requres pressure from the split air pipe, cut that pipe off, and you won't have any pressure to open the ports. Back pressure on a piston car has something to do with valves and lift or something. Who the hell knows I hate over complicated systems

I plan on picking up the RB 3 inch turbo back exhaust some day. It's so nice, and it sounds GREAT.

 

everything besides the muffler is racing beat... (the header and the presliencer) besides Imm ahave a resonator =( I dont want it to be loud...

 

couple more for show.... And for that guy who said is bad rice? This is not a cheap 30 dollar ebay muffler. this is the real (200 dolla) JDM tanabe YO! ge it right mad quick!

 

Well instead of wasting your money on a rice cannon you should have picked up a borla cat-back. Or RB mufflers...

 

it will be loud even with a presilencer, mufflers muffle the noise and that one won't. Personally i like loud and i don't mind that muffler i think dual looks much better andf racing bea sounds better but i'm sure it'll sound good and loud

 

BTW, what do you think the difference between a $30 ebay muffler and your "JDM" muffler is? Nothing.. Really. If you look inside your "jDM" muffler it is just a straight piece of pipe with resonator holes and packing inside a pretty 304 stainless can....

SO IS THE RICER MUFFLER..... It's all about the packing when the pipe goes straight through there is no difference.

You essentially wasted your money by overpaying for a "brand Name" ricer muffler.

I'm sure you will be happy with it.

But don't fool yourself thinking that you are better then the $30 ebay guys when they just happen to have an extra $170 to spend on other things..

 

Well, not to be a dick, but a lot of the times the actual materials and welds are higher quality, sometimes they are not. But the welds on my apex'i n1 are quality. looks like rolled coins, you won't find that on ebay peices.

 

Thats coolz you guys have Huge Tips... WOW wup wup for you... I got the JIC turbo back 90spec. Meaning 90mm piping from the turbo back to the canistor. Oh yah 4.5 tip.

So leave your lito cars parked on the side of the road at the runs. and ill burn all the cars from turbo charged hondas to saleen mustangs. Meaning far east coast from far west coast i got it covered.

Ps if you beat me on the straight. "lets take it to the mountains!"

 

what the hell is this forum comming to! its armagedon I say!