2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

90 TII Horsepower question

Thread Tools
 
Search this Thread
 
Old Aug 19, 2006 | 07:47 AM
  #1  
90TII's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 17
Likes: 0
From: Kansas
90 TII Horsepower question

Hi, I have a 90 tii with the following mods. Anyone have a guess of the RWHP i may be putting out? Thanks

FCD
Cone air filter
Motoria Turboback dual exhaust


everything else is stock. Let me know what you think. Thanks
Old Aug 19, 2006 | 08:35 AM
  #2  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
mad powah......
Old Aug 19, 2006 | 08:51 AM
  #3  
classicauto's Avatar
Crash Auto?Fix Auto.
Tenured Member 15 Years
iTrader: (3)
 
Joined: May 2003
Posts: 7,831
Likes: 2
From: Hagersville Ontario
no need to get testy there...you should know (since you have read the FAQ and rules..........right?) that no personal attacks are allowed on the forum.

And no one will be able to "answer" your question expect the all knowing dyno.

Why don't you try some math...(or searching for similar threads.....there are MANY with a similar setup and a similar thread)....the stock TII makes about 200bhp? right?

Now, how much HP does that exhaust mfr. claim their exhaust adds? 20-30? cut that is half. What about the intake? 10? cut that in half.

Now, you say you have an FCD but fail to mention what boost level you're running, Im going to pull 9-10psi out the air here and figure the extra pressure is going to net about 10hp.

So all together you have conservitvely 25bhp over a stock setup.....so 225-230 is my guess........

If you have an issue.....here's a tissue

EDIT:
you dumb ******, im not here to improve your post count
No, you're not.......your here to waste my time apparently.
Old Aug 19, 2006 | 09:17 AM
  #4  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
200rwhp. You're ready for the drag strip!

Old Aug 19, 2006 | 09:20 AM
  #5  
CyborgRyu's Avatar
Drift FC
Tenured Member 10 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,602
Likes: 1
From: Cincinnati, OH
sweeeet!!!!! fcd and intake/exhaust is a gain but jack squat of a gain, no boost controller, no fuel mods/controller



edit: ha for me reading other people's post. well then i say just race people and find out!
Old Aug 19, 2006 | 09:25 AM
  #6  
FC3S_nataku's Avatar
mattg prob nt coming back
Tenured Member 15 Years
iTrader: (3)
 
Joined: Feb 2005
Posts: 1,933
Likes: 0
From: OrangePark FL
you have 0 hp soon, you have to be boosting like 10 to 12 right? well what happenes when you go lean? BOOM! you need to upgrade your secondaries and fuel pump for safe measure. look on ebay for the pump, they go for $100. and check the for sale section for 720's
Old Aug 19, 2006 | 09:39 AM
  #7  
WNT2CREALPAIN's Avatar
From Start 2 Finish
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 261
Likes: 0
From: Motown
Your just a lil over stock hp.

Are you running stock boost?
Old Aug 19, 2006 | 10:08 AM
  #8  
90TII's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 17
Likes: 0
From: Kansas
i didnt mess with the boost at all. I would assume the boost went up with the exhaust. I have the factory boost gauge, so im not sure how much boost im running.
Old Aug 19, 2006 | 11:18 AM
  #9  
Radial GT's Avatar
*BOV sound*
Tenured Member 15 Years
iTrader: (16)
 
Joined: Feb 2001
Posts: 1,156
Likes: 2
From: Northern Minnesota
Calling you out with 3 posts! That is rad. I see a long road of colorfull posts
Old Aug 19, 2006 | 12:03 PM
  #10  
adrock3217's Avatar
Boost in..Apex seals out.
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 1,931
Likes: 0
From: Maryland, 21794
Ugh..

Intake and exhaust...FCD...Motoria...ugh..

You are probably spiking to 15+ psi...

Your engine will be toast soon...your turbo's will soon be on their way out..

You need pull the turbo, and port the wastegate. You then need to put on some 720cc secondary injectors, and get some kind of fuel controller (SAFC2).

Do this before touching the gas pedal again, or else sell the car. PLEASE.
Old Aug 19, 2006 | 12:05 PM
  #11  
Brody8877's Avatar
#FakeCarEnthusaist
Tenured Member: 20 Years
Liked
Loved
iTrader: (10)
 
Joined: Sep 2005
Posts: 1,817
Likes: 10
From: San Francisco
Originally Posted by adrock3217
Ugh..

Intake and exhaust...FCD...Motoria...ugh..

You are probably spiking to 15+ psi...

Your engine will be toast soon...your turbo's will soon be on their way out..

You need pull the turbo, and port the wastegate. You then need to put on some 720cc secondary injectors, and get some kind of fuel controller (SAFC2).

Do this before touching the gas pedal again, or else sell the car. PLEASE.
Also dont forget about the fuel pump. Fuel Mods are the supporting mods before you can put a full turbo exhaust in otherwise you'll get boost creep, same as spiking.
Old Aug 19, 2006 | 12:19 PM
  #12  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Thread closed due to the Originator of the thread flaming.

90TII I know you are new here, but flaming is unacceptable on the board. I am cutting you some slack this time, but if I see further flaming you will get a vacation from this board. You agree'd to this when you agreed to the TOS when signing up for the board.

Consider this a formal warning. With three formal warnings you will be banned.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
befarrer
Old School and Other Rotary
2
Oct 5, 2015 03:30 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM




All times are GMT -5. The time now is 01:01 PM.