Brad89RX7

I HAVE AN 89 S5 AND NEED TO KNOW IF I CAN PUT AN
87 S4 DRIVERS DOOR IN PLACE OF MY DANMAGED 89 S5
DOOR. Are they Identical ???

Thanks,
Brad89RX7

1987RX7guy

iTrader: (3)

I know that they were strengthened in 89+ models. But from what I can tell from my 87 88 and 89 cars is that they look almost the same and the hinge also does look the same.

cluosborne

Yes, you can use them. I know because my right door is an 89, and my left is a 86-87 base model. Just be sure to get the window tracks with the door.

flubyux2

im about to do the same swap on my car. my passenger side was sideswiped... which took out the mirror, front and rear fenders...

luckily i found a 88 base in the bone yard and ganked the front fender and door... im lookin forward to a straight bolt-on swap... after i paint it to match my car of course. hopefully the clips on my fender molding match up to the holes in the S4 fender

cluosborne

BTW, I think the trim holes on the fender are the same.

superevil

can you just switch the interior part of the door if they are both manual windows? my 86 base doesnt have speaker mounts/holes,but there is an s5 near here with 5 1/2 speaker mounts in it.

cluosborne

The interior of the door shell isn't interchangable. You'd have to cut the speaker hole and surrounding metal out and weld it into the replacement door. Once again, make sure you have the window tracks because the mounting holes differ.

flubyux2

<--- has S4 door w/ tracks, glass, regulator, crank assy, door latch and NICE window trim and felt strips

cant wait to bolt it and my fender onto my GTUs

now about that big dent in the rear fender.

banzaitoyota

I have a new 89 shell in Aiken SC if you are interested