My clutch pedal stays down when I push it dont know y please help

 

Your clutch master could be going bad, or the hose, or the slave.

To start, fill & bleed the clutch hydraulic system.

 

done and checked the slave and replaced the master

 

me last night.... same problem
haha
master and slave and flex hose. very easy.. you can do it in about 20-30 min minus bleading system
i advise changing all those parts out.
my hydrolic system was rusted threw when i last blead it. was like mud coming out.

maybe yours is like that too hah
good luck

 

If your pedal is still on the floor after replacing the master, there must still be air in the system. When I replaced mine, I had to pull the pedal off the floor many times during bleeding. It finally came up by itself, but it took a while. Just stay with it.

 

worce case. your fork went out.

 

Same issue here....Where can I get the flex hose at, or can I just make one??