6 port engine
#1
Full Member
Thread Starter
Join Date: May 2002
Location: Perth
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
6 port engine
i have almost decided what rotor im gonna use
a series 4 6 port engine imply becasue the s5 not sold here in australia
im looking for some way to get power out of it
without spending alot of cash
at fists i thought a nice high flow exhaust would be good but i then found out the the 2 extra ports need back pressure to open
so that a no go (for now)
so basically im ought ideas
i was thinking some sort of porting but dont know what
a series 4 6 port engine imply becasue the s5 not sold here in australia
im looking for some way to get power out of it
without spending alot of cash
at fists i thought a nice high flow exhaust would be good but i then found out the the 2 extra ports need back pressure to open
so that a no go (for now)
so basically im ought ideas
i was thinking some sort of porting but dont know what
#3
Senior Member
Join Date: Feb 2001
Location: louisville, KY
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
yes and no.. No in that you won't have "more" power than you would over properly working 6 ports... Yes in that, if your backpressure is not enough to open the 6p, then tying them open will give you more top end power. You will lose some low-end, but mine are tied open, and it's really not a big deal to me.
A better solution is to shoehorn something else to hopen them up.. Do a search for "6p activation" or something.. many people use the airpump or acv..
-Tesla
A better solution is to shoehorn something else to hopen them up.. Do a search for "6p activation" or something.. many people use the airpump or acv..
-Tesla
#5
Full Member
Thread Starter
Join Date: May 2002
Location: Perth
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
i am a newbei to ro taries so i dont know much i just decided these were a good engine but lately ive heard they they cant be modded
looking for about 95kw at the rear wheels and itll be going in a rx3/s3 rx2 capella
just need that power
but dont know where to start on a small budget and that means no aftermarket ecu
thanks for any help
looking for about 95kw at the rear wheels and itll be going in a rx3/s3 rx2 capella
just need that power
but dont know where to start on a small budget and that means no aftermarket ecu
thanks for any help