5 and 6 ports not opening?
#1
707
Thread Starter
Join Date: May 2004
Location: Santa Rosa Ca
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
5 and 6 ports not opening?
1988 convertible new engine all new parts*
street ported stage 2
i just added (2) GSL-SE injectors for the seconderys
worked great big improvment at higher RPMS
now after a month something isnt right...?
no pull at 3-4k injectors still working...yes
acuators stuck....no, 5th and 6th ports not opening???? how do i check? the car runs fine just doesnt give that pull from 3-4k...at higher rpms it doesnt run as smooth, any advice thanks
street ported stage 2
i just added (2) GSL-SE injectors for the seconderys
worked great big improvment at higher RPMS
now after a month something isnt right...?
no pull at 3-4k injectors still working...yes
acuators stuck....no, 5th and 6th ports not opening???? how do i check? the car runs fine just doesnt give that pull from 3-4k...at higher rpms it doesnt run as smooth, any advice thanks
#2
illegal ninja moves
Join Date: Dec 2003
Location: Gainesville, Florida
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
can you turn the port valves by hand? the actuators are attached to them, so you might have to remove the actuators to get a good grip on the valve cranks, but you should be able to turn them with the engine off.
#3
777** The Anti-rice
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
www.aaroncake.net under my car, im too lazy to give direct link, and its late.
#4
707
Thread Starter
Join Date: May 2004
Location: Santa Rosa Ca
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
dezerte: on your page it tells you how to test the actuators..? not the 5th and 6th ports...? do the actuators controll the ports...? if so my acuators are working...did the air hose test...so if the acutors controll the 5th and 6th ports than mine are working?
i have loss of power at 4 rpm...
i have loss of power at 4 rpm...
#5
777** The Anti-rice
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
lol thats not my site, its aaron cakes
And i dont think you should have a "loss" of power, you just shouldnt be able to gain any..
You secondary injectors are supposed to activate at 3800rpms...
Could it be that you have the 3800 RPM hesitation?
try doing a search on that, sorry im not much help
And i dont think you should have a "loss" of power, you just shouldnt be able to gain any..
You secondary injectors are supposed to activate at 3800rpms...
Could it be that you have the 3800 RPM hesitation?
try doing a search on that, sorry im not much help
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM