3rd gen wheels on 2nd gen
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: east Tn
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen wheels on 2nd gen
I've scored a great deal on a set of 3rd gen wheels and wanna run them on my 91 vert. The rears fit ok but the front isn't even close. Any ideas including spacers and where to find them. Also, how about swapping the front struts for coilovers. Thanks.
#2
Full Member
Join Date: Feb 2001
Location: Trenton, NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
You need to run spacers on the front to prevent the tire from rubbing the strut assembly. Use the 25mm hubcentric spacers from H&R. You may also need to run 205's on the front to prevent the tire from rubbing the fender lip.
I currently have the following:
H&R 25mm spacers on all four tires...
225/50/16's on the rear
205/55/16's on the front.
Matt
I currently have the following:
H&R 25mm spacers on all four tires...
225/50/16's on the rear
205/55/16's on the front.
Matt
Thread
Thread Starter
Forum
Replies
Last Post