2 questions... side molding? and..
#1
777** The Anti-rice
Thread Starter
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
2 questions... side molding? and..
How much do the S5 side moldings cost? like for the door, fenders and bumpers if anybody knows off the top of their head..
And how do you remove those strips under the drivers and passengers window that are always all rusted and ugly looking?
thx in adv.
And how do you remove those strips under the drivers and passengers window that are always all rusted and ugly looking?
thx in adv.
#2
Former Moderator. RIP Icemark.
On ebay, usually the S5 side mouldings run around $60 a set... Probably 10 times that at a mazda dealer.
The exterior window trim at the bottom edge of the window on the door, just slides up to remove.
The exterior window trim at the bottom edge of the window on the door, just slides up to remove.
#3
Senior Member
if you're lucky, at a local junkyard, they'll run about $30-50 dollars.
I'm guessing you're converting from S4 to S5 moldings? One problem is that the S4 moldings are held on by epoxy while the S5 were snap-in. Either you cut off the plugs or cut holes in your car to snap the moldings in.
I'm guessing you're converting from S4 to S5 moldings? One problem is that the S4 moldings are held on by epoxy while the S5 were snap-in. Either you cut off the plugs or cut holes in your car to snap the moldings in.
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
10
08-19-15 07:25 AM