2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

1988 RX-7 convertible top question.

Thread Tools
 
Search this Thread
 
Old Dec 31, 2016 | 06:55 AM
  #1  
flgator75's Avatar
Thread Starter
Don't tread on me!
 
Joined: Jul 2016
Posts: 22
Likes: 0
From: Yulee, FL
FL 1988 RX-7 convertible top question.

My convertible top was working great until yesterday. I was attempting to lower the top but it wouldn't go down(no sound either) but if I turned the switch to raise it there was a sound & it would attempt to raise.

This may sound like a stupid question but is the top up/down switch at fault or could there be something else in play here?

Btw, would it be possible to post a section on convertible tops that would include info on obtaining them, troubleshooting, part numbers etc in the FAQ section?

Last edited by flgator75; Dec 31, 2016 at 07:13 AM. Reason: ;)
Reply
Old Dec 31, 2016 | 07:45 AM
  #2  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
probably a dirty switch or relay, try pressing it about a hundred times.
Reply
Old Dec 31, 2016 | 12:28 PM
  #3  
flgator75's Avatar
Thread Starter
Don't tread on me!
 
Joined: Jul 2016
Posts: 22
Likes: 0
From: Yulee, FL
Originally Posted by RotaryEvolution
probably a dirty switch or relay, try pressing it about a hundred times.
Funny, I did just that & it's now working. For how long is another matter.

Bill
Reply
Old Dec 31, 2016 | 10:59 PM
  #4  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
with anything that isn't used for a period of time, use is the best medicine. or just disassemble the switch and relay and clean the contacts.
Reply




All times are GMT -5. The time now is 10:57 PM.